What are the basic common sense of ice shaver?

Update:29 Oct 2020
Summary:

What are the basic common sense of ice shaver? The ice […]

What are the basic common sense of ice shaver?

The ice shaver is a device used to shave ice crusher wholesale  into snowflake-shaped crushed ice, which can produce shaved ice food with various tastes and flavors. The principle of the ice shaver is roughly that after the ice shaver is plugged in and started, the plunger pump inside the ice shaver will spray the water mixed with salt through several filters to spray 0.2 kg of water evenly on the surface of the inner cavity, and then the salt water will be outside. The refrigerating surface of the cavity instantly forms a 3 mm thick ice surface, and then under the action of the high-speed rotating ice blade, the ice made on the surface of the outer cavity is beaten into snowflake fragments and dropped into the storage bin, which becomes a usual eating Arrived icy shaved ice. The principle of the civilian ice maker is basically the same, mainly relying on the rotating ice box inside the cavity.

Shaved ice machine Shaved ice is a cold drink made by cutting ice cubes into snowflakes, topping them with condensed milk, syrup, and mixing them with various fruits or other ingredients. Good, eating more will not make you feel full. The equipment used in cold drink shops to make ice drinks is a device used to shave ice cubes into snowflake-shaped crushed ice, which is used to produce shaved ice food with various tastes and flavors. Let's take a look at the editor of Taixing Prophet Snowflake Ice Maker below!
The working principle of ice shaver

Break the ice cubes to about 20 mm in diameter before putting them into the barrel. It is advisable to protrude above the barrel. Pay attention to turn on the power switch first, and then allow the handle of the pressing material cover to be pressed down after the motor drives the power plate to rotate. At this time, tighten the blade on the rotating cutter plate to chop the ice cubes. However, do not use too much force when pressing the handle of the pressing material cover down, so as to prevent the motor from blocking and damaging the motor. And pay attention to the margin after the ice material is reduced, and replenish new ice cubes in time.

0